Cn70/Cn70E 磁条阅读器固锁适配器 (1000Aa06) - Intermec CN70 Anleitung

Understanding the Status LED
Blink Rate
Solid for 3 seconds
Blinks once every 3 seconds
Blinks 4 times
Charging the Computer
CN70/CN70e 磁条阅读器固锁适配器
(1000AA06) 说明
配置 COM 端口
首次连接适配器之前，您需要先配置 COM 端口。
1 按 Start > Settings > System > Intermec Settings >
Communications > Serial Port Switch，然后选择 COM5 docking。
2 当提示您保存并重新启动时，按 ok。
3 按 OK 保存。
4 按 Power 按钮。
5 按 Reboot。计算机即将系统地重新启动。
4
Description
Attached and ready for use
Idle
Card read successfully
To charge in an office environment,
use power supply Model 9001AE02
(P/N 851-094-002). To charge in a
vehicle, use power supply Model
9002AX02 (P/N 852-071-002).
When the magstripe reader is attached to the
computer, you can still charge the computer
using:
DX1 Desktop Dock
DX2 Dual Dock
DX4 Quad Dock