Rate Limitation; Storm Control; Table 146: Cli "Rate Limitation" Configuration; Table 147: Cli "Storm Control" Configuration - WAGO 852-1505/000-001 Handbuch

WAGO-ETHERNET-Zubehör 852
852-1505/000-001 Industrial-Managed-Switch

10.3.3.1.2 Rate Limitation

Table 146: CLI "Rate Limitation" Configuration

Node
enable
configure
configure
configure
configure
Example
L2SWITCH#configure terminal
L2SWITCH(config)#bandwidth-limit egress 1 ports 1-8
L2SWITCH(config)#bandwidth-limit ingress 1 ports 1-8

10.3.3.1.2.1 Storm Control

Table 147: CLI "Storm Control" Configuration

Node
enable
configure
configure
Example
L2SWITCH#configure terminal
L2SWITCH(config)#storm-control rate 1 type broadcast ports 1-6
L2SWITCH(config)#storm-control rate 1 type multicast ports 1-6
L2SWITCH(config)#storm-control rate 1 type DLF ports 1-6
Command
show bandwidth-limit
bandwidth-limit egress
RATE_LIMIT ports
PORTLISTS
no bandwidth-limit egress
ports PORTLISTS
bandwidth-limit ingress
RATE_LIMIT ports
PORTLISTS
no bandwidth-limit ingress
ports PORTLISTS
Command
show storm-control
storm-control rate
RATE_LIMIT type
(bcast|mcast|DLF|bcast+
mcast|bcast+DLF|mcast+
DLF|bcast+mcast+DLF)
ports PORTLISTS
no storm-control type
(bcast|mcast|DLF|bcast+
mcast|bcast+DLF|mcast+
DLF|bcast+mcast+DLF)
ports PORTLISTS
Description
This command displays the current "Rate Limitation"
configurations.
This command enables the rate limitation for
outgoing packets and sets the limit.
This command disables the rate limitation for
outgoing packets.
This command enables the rate limitation for
incoming packets and sets the limit.
This command disables the rate limitation for
incoming packets.
Description
This command displays the current "Storm Control"
configurations.
This command enables the rate limitation for
broadcast, multicast or DLF packets and sets the rate
limitation for a specified type.
This command disables the rate limitation for
broadcast, multicast or DLF packets.
Anhang 323
Handbuch
Version 1.0.0