Acer TravelMate 220 serie Kurzanleitung Seite 79

"A certified power supply cord has to be used with this equipment. The relevant national installation
and/or equipment regulations shall be considered. A certified power supply cord not lighter than
ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm
H05VVH2-F2 3G 0.75mm
IEC 60245 (designation H05RR-F 3G 0.75mm
HINWEIS
Zum Netzanschluß dieses Gerätes ist eine geprüfte Leitung zu verwenden. Es sind die zutreffenden
nationalen Errichtungs- und/oder Gerätebestimmungen zu beachten. Es ist eine geprüfte flexible
PVC-ummantelte Leitung entsprechend IEC 60227 (H05VV-F 3G 0.75mm
zu verwenden. Andernfalls ist eine flexible Leitung aus systhetischem Gummi entsprechend IEC60245
(Bauartkurzzeichen H05RR-F 3G 0.75mm
FCC DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for Class B personal Computers and
peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the device is operated in a residential environment. This
device generates, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If you determine the device does
cause harmful interference to radio or television reception (this may be determined by monitoring the
interference while turning the device off and on), you are encouraged to try to correct the interference
by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio or TV technician for help.
To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.
CAUTION:
Changes or modifications not expressly approved by CHI MEI OPTOELECTRONICS CORP.
could void the users authority to operate the device under FCC compliance regulations.
CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE STATEMENT
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus
as set out in the radio interference regulation of the Canadian department of communications.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/336/EEC "EMC Directive" and
72/23/EEC "Low Voltage Directive" as amended by Directive 96/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential
areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the
buildings.
All places of operation are characterized by their connection to the public low voltage power supply
system.
We reserve the right to change specifications without notice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR
meets the ENERGY STAR
This manual is printed on recycled paper.
2
) shall be used. Alternative a flexible cord be of synthetic rubber according to
2
2
) zu verwenden.
®
Partner, CHI MEI OPTOELECTRONICS CORP. has determined that this product
®
guidelines for energy efficiency.
) shall be used."
2
oder H05VVH2-F 3G 0.75mm
2
or
2
)