Installation Steps - Air Live ARM-201 Handbuch

Installation Steps

1. Please install your network cards first
before installing the Router
2. Connect the power and LAN cable to the
router.
3. If you need to change router configuration,
please follow the procedure below:
The Router default IP address is
192.168.2.1. Please make sure your
computer IP is in the same subnet as the
router (i.e. 192.168.2.x)
Open the web browser and enter
192.168.2.1. When asked for Login and
Password, just type admin for login name
and airlive for Password.
ARM-201
Software Installation Steps
Software Support
This Setup wizard can be run in Windows
98SE/Me/2000/XP. The following procedures are
operated in Windows XP. (Procedures are similar
for Windows 98SE/Me/2000.)
Internet: Basic Setting
1. Please insert the driver CD that came with
your device into your CD-ROM drive, the
driver CD will auto start and show the
installation guide. If not, please double click
the CD-ROM device icon in "My computer",
and execute autorun.exe. The following
screen will be displayed. Please Click
"Setup Wizard".
English
3