Stubai 506.872 Bedienungsanleitung Seite 3

Delivery content
Torch, 2.200 mAh Li-Ion-battery (rechargeable),
USB 2.0/micro USB cable, bottle opener cap,
storage box, beltbag, operating instructions
1. Commissioning
Note:
Before the initial commissioning you have to charge the battery for at least 6 hours.
2. Charge battery
cable into a compatible interface (for instance: power supply, PC, laptop etc.)
3. Applicability
a. Torch
The torch has different light modes in the following order:
STRONG LIGHT INTENSITY – OUT – MEDIUM LIGHT INTENSITY – OUT – LOW LIGHT INTENSITY –
OUT – FLASHING LIGHT – OUT – SOS – OUT. If you press and hold the ON/OFF-Button for
2 seconds, the SOS-light switches on.
b. Powerbank
Operating instructions
Aluminium-Torch
Article number 506.872
a.)
Connect the provided USB cable by opening
the side cover on the torch.
Plug the micro USB end of the cable into the
torch and the other end of the cable into the
device you want to charge.
3
Unscrew the rear part of the
torch und pull off the insulation
strip of the battery. Screw on the
rear end again and tighten it.
a.) Connect the provided
USB cable by opening the
side cover on the torch.
b.) Plug the micro USB end
b.)
of the cable into the torch
and the other end of the