Start of operation
Using the product
Note: Before first use remove the insulation strip.
The product will automatically switch on when motion is
detected in a dark environment.
The product will automatically switch off when motion is no
longer detected for a period of time.
Replacing batteries
Open the battery compartment
Remove the old batteries and insert new batteries (see Fig. C).
Check the polarity of the batteries. This is shown in the battery
compartment
Close the battery compartment
Cleaning and care
Only a dry, lint-free cloth should be used for cleaning.
Disposal
The packaging is made entirely of recyclable materials, which you
may dispose of at local recycling facilities.
Observe the marking of the packaging materials for
waste separation, which are marked with abbreviations
b
a
(a) and numbers (b) with following meaning: 1–7: plas-
tics / 20–22: paper and fibreboard / 80–98: composite
materials.
.
7
at the back of the product.
7
.
7
GB
11