ASROCK FM2A58 Pro+ Bedienungsanleitung Seite 25

Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.1 No. 9)
Power LED Header
(3-pin PLED1)
(see p.1 No. 12)
Chassis Fan Connectors
(4-pin CHA_FAN1)
(see p.1 No. 8)
(4-pin CHA_FAN2)
(see p.1 No. 3)
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.1 No. 2)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
DUMMY SPEAKER
1
+5V DUMMY
1
PLED-
PLED+
PLED+
GND
+12V
CHA_FAN_SPEED
FAN_SPEED_CONTROL
GND
+12V
CHA_FAN_SPEED
FAN_SPEED_CONTROL
FAN_SPEED_CONTROL
CPU_FAN_SPEED
+12V
GND
1 2 3 4
Please connect the chassis
speaker to this header.
Please connect the chassis
power LED to this header to
indicate system power status.
The LED is on when the system
is operating. The LED keeps
blinking in S1 state. The LED is
off in S3/S4 state or S5 state
(power off).
Please connect the fan cable
to the fan connector and
match the black wire to the
ground pin.
Please connect the CPU fan
cable to the connector and
match the black wire to the
ground pin.
Pin 1-3 Connected
3-Pin Fan Installation
FM2A58 Pro+
23