Install - Beeper Road SCOOTCROSS Vmad Gebrauchsanweisung

Install

Before leaving to roll on your scootcross, some assemblies are necessary.
1
For the assembly of the saddle you need the two serrated roller screws
present in the pack.
3
Screw the two serrated roller screws provided to the base of the saddle.
5
Replace rests it foot.
2
Raise rests it foot of your scootcross and insert the saddle in the hole
envisaged for this purpose.
4
Connect the wire of food of back red light on the connector placed under
puts back foot.
20