fontastic PRIME MESU Bedienungsanleitung Seite 3

GB
Hands-free function
Using the integrated hands-free function and built-in microphone, it is easy to have clear and comprehensible
telephone conversations. Incoming calls are signalled via a ring tone, even while music is playing.
Accepting/ending/declining calls
To accept an incoming call, press the multifunction button
To end a call, press the multifunction button
To decline an incoming call, press the multifunction button
Redial
In Bluetooth mode press the multifunction button
The connected telephone will redial the last number dialled.
Volume control
Increase volume: press and hold the volume+ button (6) until you reach the desired volume.
Decrease volume: press and hold the volume- button (4) until you reach the desired volume.
Inductive charging
Qi-enabled devices can be charged using the MESU's inductive charging function. The speaker must be
switched on or connected to the power supply. If this is the case, place your smartphone on the marker (15)
in the middle of the tabletop. The device will begin to charge.
Please note: if the speaker is not connected via Bluetooth
This will interrupt the charging process.
USB charging port
When the MESU speaker is switched on or connected to the power supply, the USB port (5V DC 1A)
can be used to charge USB compatible devices. Plug the USB A connector of the charging cable into t
he MESU's USB charging port (11).
TWS function
With the TWS function you can connect two speaker tables to each other. The first speaker table is the main
speaker connected to the Bluetooth device. The music is controlled via the main speaker. The second speaker
®
table is linked to the main speaker and wirelessly plays the sound only.
Please note: TWS only works with Bluetooth
® and not while operating over AUX or USB.
1. Switch on both of the speaker tables and double-click on the on switch
The speakers will switch to team pairing mode. An audible signal will sound, the orange-coloured LEDs of each
of the speaker tables will flash equally fast. After team pairing, the main speaker's (master) orange LED will light
up permanently, the orange LED of the second speaker will flash slowly.
2. If you have successfully connected the two speakers, briefly press the button
to end team pairing mode.
3. Telephone functions can only be performed via the main speaker in TWS mode.
Automatic power off:
The speaker will power off automatically after 10 minutes if there is no Bluetooth
Removable tabletop
The wipeable tabletop (14) of the MESU can be removed without problem and used as a tray for example.
Pull the tabletop up using the tab.
3
(3) once briefly.
(3) once briefly.
(3) once for approx. 2 seconds.
(3) twice in order to activate this function.
or AUX, it will switch off automatically after 10 minutes.
®
(1) of one of the two speaker tables.
(1) on one of the speakers
or AUX-in connection.
®
Specifications:
• Material: MDF + plastic + metal + linen-like fabric
• Functions: Bluetooth , hands-free, TWS, AUX-in, USB charging, USB playback, wireless inductive charging
®
• Bluetooth ® : V4.2
• TWS (true wireless stereo)
• USB: 1x charging port 5V 1.1A / 1x multimedia input, MP3/WMA
• Speaker output: 2 x 12 Watt
• Speaker: 3-inch, 4 Ohm, 90Hz-18Khz
• Wireless charging: 5V DC
• Built-in battery: 2x 2500 mAh Li-Ion, 18.5 Wh
• Music playback time: 6 hr at 50% volume
• Power supply: input 100-240V AC 50/60 Hz / output 12V DC 1.2A, TÜV/GS tested.
• Dimensions: 422.5 x 39.4 x 640 mm (LxWxH)
• Weight: 5.7 kg
Safety information:
• Never open the device
• Do not submerge the device in water and keep it away from moisture.
• Never forcibly connect a cable.
• Remove electronic devices from the power supply if they will not be used for a long period of time.
• Do not use the device if it exhibits visible damage.
No liability is accepted for any damage which may occur through improper operation. If you require technical support,
please contact our support team via email at service@fontastic.eu.
Registration and Safety
We hereby declare that this device carries the CE mark in accordance with the regulations and standards.
It complies with the fundamental requirements of the (RED) 2014/53/EU.
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the national legal
system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to
the public collecting points set up for this purpose or point of sale. Details of this are defined by the national law of
the respective coun-try. This symbol on the product, the instruction manual or the package indicates that a product
is subject to these regulations. By recycling, re-using the materials or other forms of utilising old devices, you are
making an important contribution to protecting our environment.
GB
4