Brother VRCLP45B Installationsanleitung Seite 3

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
About the Clamp Frame
This frame will be used for embroidering specially
shaped items that cannot be held in a traditional
frame, such as shoes and gloves.
Verifying the package
contents
Check that the following parts are included. If any
item is missing or damaged, contact your
authorized sales representative.
● The maximum embroidery area of the
clamp frame is 24 mm × 45 mm (7/8 inch
× 1 3/4 inches)
■ Contents of clamp frame kit
1.
Embroidery frame holder D
1
Clamp frame S
2
Installation Manual
3
* Install embroidery frame holder D in order to
attach the clamp frame.
Note
2.
Items that can be
embroidered
When using the clamp frame, a wide variety of
items can be embroidered, except extremely hard
or thick materials.
● When embroidering thin materials, be
● Shoes with the size less than 23 cm (US5/
● The maximum embroidery area may be
■ Sample projects
3.
1/4
Note
sure to use a stabilizing product.
UK4/EUR37) cannot be embroidered.
smaller than 24 mm × 45 mm (7/8 inch ×
1 3/4 inches) depending on the size,
depth, shape or the kind of item you are
embroidering.
Shoes (front) Shoes (tongue)
Gloves (strap) Small bag