Intenso Memory 2 Move Bedienungsanleitung Seite 106

By selecting Wired Access, the Dynamic IP is selected as the default setting. You can manually
assign your own IP address by clicking on the green arrow and select the Static IP option.
Click on the "X" button if you wish to cancel and exit this window.
Click on the "Next" button to continue the process. The next step is to configure the WiFi and
LAN settings.
WiFi & LAN Setting
 SSID:
Type-in a combination of letters and numbers only. 32 characters is the
maximum allowable SSID length.
 Channel：
The default setting is set to Auto. There are 14 channels available to choose
from.
 Modes:
The default setting is 802.11b/g/n. You can also manually set the modes to
11Mbps (802.11b), 54MBPS (802.11G), and 150Mbps (802.11n).
 Security：
The WPA-PSK, WPA2-PSK , Mixed WPA/WPA2-PSK (default) are available.
 Password： Minimum 8 (Maximum 63) characters.
 IP Address： The default IP address is set to 10.10.10.254 with subnet mask of
255.255.255.0. The IP address can be changed.
Click on the "Next" button to change the admin default password. Click on the "Next" button
once the password has been modified. You may click on the "Skip" button to keep the default
password.
EN- 18