Inhaltsverzeichnis
Werbung
2.6 Onboard Headers and Connectors
Serial ATA3 Connectors
(SATA_1: see p.1, No. 18)
(SATA_2: see p.1, No. 19)
(SATA_3: see p.1, No. 17)
(SATA_4: see p.1, No. 16)
(SATA_5: see p.1, No. 15)
(SATA_6: see p.1, No. 14)
(SATA_7: see p.1, No. 8)
(SATA_8: see p.1, No. 9)
USB 2.0 Headers
(9-pin USB45)
(see p.1 No. 20)
(9-pin USB67)
(see p.1 No. 21)
USB 3.0 Header
(19-pin USB3_2_3)
(see p.1 No. 7)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.1 No. 24)
22
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
SATA_2
SATA_4
SATA_1
SATA_3
USB_PWR
P-
P+
GND
1
GND
P+
P-
USB_PWR
Vbus
IntA_P2_SSRX-
IntA_P2_SSRX+
GND
IntA_P2_SSTX-
IntA_P2_SSTX+
GND
IntA_P2_D-
IntA_P2_D+
GND
PRESENCE#
1
MIC2_R
MIC2_L
These eight Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA_6
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
SATA_5
Besides four default USB 2.0
ports on the I/O panel, there
DUMMY
are two USB 2.0 headers on
this motherboard. Each USB 2.0
header can support two USB
2.0 ports.
Besides two default USB 3.0
Vbus
Vbus
IntA_P3_SSRX-
ports on the I/O panel, there is
IntA_P3_SSRX+
GND
one USB 3.0 header on this
IntA_P3_SSTX-
motherboard. This USB 3.0
IntA_P3_SSTX+
GND
header can support two USB 3.0
IntA_P3_D-
ports.
IntA_P3_D+
ID
1
This is an interface for the front
panel audio cable that allows
MIC_RET
OUT_RET
convenient connection and
control of audio devices.
OUT2_L
J_SENSE
OUT2_R
Werbung
Inhaltsverzeichnis
