Accessories And Replacement Parts; Disposal; Technical Specifications - Beurer Barbers Corner HR 6000 Gebrauchsanweisung

2. Hold the stainless steel razor blade under running water so that the jet of water
runs through the stainless steel razor blade from the inside out.
3. Leave the stainless steel razor blade to dry completely before reattaching
it to the device.
Clean the device regularly, at the latest once the maintenance indicator symbol
(see chapter 6 on device description) lights up in the display.

10. Accessories and replacement parts

The stainless steel razor blade of the HR 6000 is self sharpening. For hygienic
reasons, the stainless steel razor blade can be reordered from the webshop at:
www.beurer-shop.de
Designation
Stainless steel razor blade

11. Disposal

For environmental reasons, do not dispose of the device in the household waste
at the end of its service life. Dispose of the device at a suitable local collection
or recycling point in your country. Dispose of the device in accordance
with the EC Directive on Waste Electrical and Electronic Equipment
(WEEE). If you have any questions, please contact the local authorities
responsible for waste disposal.
WARNING
The integrated battery cannot be removed for disposal. Risk of explosion and
injury.
The lithium-ion battery used in this device must not be disposed of in household
waste, but must be disposed of correctly. For information on disposal, please
contact the authorised seller or a municipal collection point.
During disposal, it must be pointed out that the device contains a battery.
Discharge the battery before disposal. Take the device and switch the Body
groomer on until the battery is flat.
NOTE
If it is not possible to discharge the battery due to a fault or damage, please
consult your waste collection point.

12. Technical specifications

Model
Weight
Device dimensions
Device protection type
Device input
Item number and/or order number
734.147
HR 6000
103 g
17.1 x 3.8 x 3.3 cm
IPX6
5 V 1 A
24