Troubleshooting - Lacrosse WT485 Bedienungsanleitung

TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which maybe caused by electro-
static discharge or other interference, use a thin object to press the RESET button at the bottom of
the clock. The clock radio will be reset to default settings and you need to set it again.
Problem
LCD is blank
No Outdoor Temperature is
displayed
Temperature is incorrect
DCF time and date will not set
or update
Time is one or few hours off
Solution
1. Press RESET on the main unit.
2. Check if AC/DC adaptor or DC jack is loose or
unplugged.
1. Press and hold + / IN-OUT
2. Press and hold + / IN-OUT, then press RESET on
the outdoor sensor.
3. Observe if the Low Battery icon appears next to the
outdoor temperature. If yes, replace batteries in
outdoor sensor with fresh alkaline batteries.
4. No other interfering sources are being used (such as
computer monitors, TV sets, headphones, or
speakers) in the path of signal from the outdoor
sensor. The signal travels in a straight line, an
electrical source near that "line" may cause
interference.
1. Press RESET on the main unit.
2. Make sure your main unit and the outdoor sensor is
away from sources of heat / cold / direct sunshine.
1. Wait until overnight for signal to be received.
2. Move your weather station away from sources of
electricity.
1. Make sure you select the right time zone.
English Page 8 of 9