Seite 51
Note: "Decoder" is used in all the menu screens. The term "decoder" also stands for "STB (Set Top Box)", "Receiver" or "Digital receiver". In the user manual all descriptions refer to "receiver". 6.10.1 Difference Between Reminder and Timer _________14 6.10.2 Viewing and Recording Reminders/Timers _________15 6.10.3 Reminder/Timer Conflicts _____________________15 6.10.4 Timer Manager _____________________________16 4.2.1 Mode setting ________________________________6...
Seite 53
Warning: Plastic bags can be dangerous. To avoid suffocation keep the bag away from babies and children.
Seite 55
SELV: Safety Extra Low Voltage. Hazardous Voltage. TNV 3: Telecommunication Network 3. SCART is also called Euroconnector or Peritel. The supplied SCART lead is suited for RGB format which allows the best picture quality. Consult the user manual of your TV set to select its RGB capable SCART socket input.
Seite 56
● ● ● Note: we recommend Volume and mute control via your digital ● receiver. Refer to chapter 4.2.2.2 for setting. Note: to reset the volume/mute control to TV.
Seite 58
Note: Before starting to connect, check your current wiring because you can keep the coaxial connection in between your TV and your video recorder provided they are connected as shown below. This connection ensures you can still watch and record your current terrestrial channels if necessary.
Seite 59
➤ ● ● ➤ ● ➤ ● ➤ ● ● Note: Your satellite receiver can only be updated via Astra 19.2° East satellite. Therefore if you want to benefit from further upgrades you, at least, have to install your receiver for the reception of the Astra 19.2°...
Seite 60
HOT BIRD TELECOM ASTRA A B C D DiSEqC switch (4 inputs) Satellite recever Note: - For more details on possible option settings consult the paragraphs 8.4.2 "Installation / Antenna configuration" and 8.4.3 "Installation / LNB Configuration". The proper satellite installation requires: Matching LNB number with satellite name (for instance Astra 19.2 allocated to LNB1) Right physical connection in between the LNB aiming at a given satellite and the appropriate DiSEqC switch input.
Seite 61
● ● Note: During power up after putting the rear panel mains switch to on, it is normal for the front display to turn off for few seconds. It shall turn on later on by showing MHP . ● ● Radio Label TV Channel List Note: Channels lists allow you to work in so-called browsing mode.
Seite 69
Channel Pool Filtering Channel Pool Content List Organization Adding a New List Deleting Channel List...
Seite 70
Confirm Deleting Channel List Channel Pool Filtering List Editing Screen Channels Source Selection Adding Channels to List A...
Seite 71
For Parents Submenu How to Lock Channels later Decoder Lock Parental Level Enter PIN Code...
Seite 72
Your Preferences Submenu Note: 1- The YES option shall be set if Volume & Mute are controlled via the receiver (so called STB). 2- The NO option shall be set if Volume & Mute are control by the TV set. Display Options Screen Language Options Screen Installation Submenu...
Seite 73
Settings Submenu TV Settings Screen Note: If you set this option to Yes, when the broadcast carries Dolby Digital: - No audio will be available at receiver's TV & VCR SCARTs as well as L/R audio outputs. Only Dolby Digital bit stream (AC3 - 5.1) will be available at Digital System Settings Screen Optical Out.
Seite 74
Modem Settings Screen Select Country Local Time Screen Antenna Configuration...
Seite 75
Note: We strongly advise you to keep the Astra 19.2° East satellite in your installation as LNB1 because your satellite receiver software may only be upgraded via the Astra 19.2° East satellite. In this way, you can enjoy new software versions of your receiver can be updated. LNB Configuration Note: For more details about installation of antenna set up including a DiSEqC switch refer to 5.3.2 section.
Seite 76
Channel Searching Method Sattellite Selection Channel Search in Progress Decoder Status Submenu...
Seite 78
● ● Satellite recever Note: While the recording is in progress, your receiver is protected from inadvertent action to disrupt the recording. Please note that during the recording the rEc label is displayed on the front panel display. To cancel the running recording, press .
Seite 80
Checking For Upgrade Upgrade Can Be Initiated Upgrade Notification (Auto Upgrade = No)
Seite 81
If the battery change takes more than 1 minute the remote control may return to the Philips brand factory settings. Therefore you shall proceed with a new setting of your remote control, with the help of the table above, for your non Philips branded appliances.
Seite 82
Note: Some of the functions described below may not be available or may not have the same behaviour for all appliances. ¯ ¯ VWCB...
Seite 83
Note: Some of the functions described below may not be available or may not have the same behaviour for all appliances. VWCB...
Seite 84
Note: Some of the functions described below may not be available or may not have the same behaviour for all appliances. VWCB...
Seite 85
Note: Some of the functions described below may not be available or may not have the same behaviour for all appliances. (*) Indicates the commands which are only available for Philips Tuner / Amplifiers.
Philips France Digital Video Set Top Boxes DV-STB/QP 03130/PH (report No.) KONFORMITÄTSERKLÄRUNG PHILIPS FRANCE Wir, (Name des Herstellers) 51, rue Carnot 92156 SURESNES Cedex, FRANCE (Adresse des Herstellers) erklären auf Grund unserer allgemeinen Verantwortung für das elektronische Produkt: PHILIPS DSR5600/00...