Tips For Energy Savings - Kalorik TKG RFG 1001 Handbuch

Fax +32 2 359 95 50

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
Clean the appliance before use (see chapter "Maintenance").

TIPS FOR ENERGY SAVINGS

Try not to open the door too often, especially when the weather is wet and hot. When you
open the door, close it as soon as possible.
Set the thermostat from higher to lower settings as soon as possible (depends on how loaded
the appliance is, ambient temperature etc.).
Before loading the appliance with packages of fresh foods, make sure they are cooled to
ambient temperature. Please cool hot foods to room temperature before placing them in the
refrigerator.
IMPORTANT
DANGER: Risk of child entrapment. Before you throw away your old refrigerator:
Take off the door.
-
Leave the shelves in place so that children may not easily climb inside.
-
The appliance must be correctly connected to the power supply.
Do not touch the cooled surfaces while the appliance operates, especially not with wet hands,
because the skin may stick to the cold surfaces.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
11
Assembly page 11/40
TKG RFG 1001 - 110114