Camalarm - Atlantis A13-A750G-AK Bedienungsanleitung

4. +CamAlarm

This camera has been designed to be combined with an Atlantis alarm system +Alarm
A750. The connection to system is fast and easy. It's possible to combine the single
sensor to the cameras, so when sensor are triggered you can immediately view the
building status through the related camera. It's possible to connect several cameras
to your alarm system in order to monitor different areas (two way audio and IR night
vision). The A750 Camera integrate a pan and tilt motor and can be rotated up/down
and left/right directly from the App. It support HD standard and can save video in
H.264. The camera only works if combined with a +Alarm A750 system.
+CamAlarm is included into Advanced (A13-A750-AK). You can also buy separately
and add to Base Kit (A13-A750-BK).
Pairing with +Alarm (using +Alarm App)
 Please always connect +CamAlarm with LAN before powering up when you first
using it.
 Make sure the the settings like DHCP Server and UPNP are enabled on your router.
 Connect the power cable, the +CamAlarm will run some diagnostic processes like
rolling the camera.
 After 1 minute, the startup is completed.
 Please use +Alarm App to scan the QR code to pairing +CamAlarm.
 The QR code is printed on the bottom of +CamAlarm.
Watch live video by +Alarm
 Tap +CamAlarm listed in the +Alarm App[
 After plugin is installed (only for Android), tap it again and watch the live video or
control the camera like moving or talking, etc.
 [ ] Watch by dragging on the screen or tapping Move button and control with
joystick.
 [ ] Snapshot the current screen and save it to phone album.
 [ ] Listen to the sound around +CamAlarm.
 [
] Talk while tapping and it plays immediately via camera speaker.
].
82
ENG