Inhaltsverzeichnis
Werbung
1.3 Get Ready and Power On
nsert sim card and connect the power cable (For those micro or nano SIM cards,
please use sim adapter to fit the card slot).
On the back of the panel, open the battery cover, you will see a slot for your SIM
Card. Insert the Sim Card and connect the power cable.
Power ON
Flip the switch on the back of the panel to the ON position. Replace the battery
cover. Wait 20 seconds as the system runs a start-up diagnostic with a welcome
screen.
You will hear a confirmation when the test is complete.
When
you
see
Now the +Alarm can be positioned (desktop or wall).
+Alarm uses GSM based SIM cards to send text messages
and make phone calls.
Make sure PIN-codes and voicemail are de-activated on the
SIM before use with the panel.
Make a note of the SIM telephone number, you will need it
for setup.
the
main
screen
(
left
)
the
70
ENG
system
is
ready.
Werbung
Inhaltsverzeichnis
