Stryker 350-220-000 Bedienungsanleitung Seite 3

Cable Remote Control (REF 350-220-000)
U.S. federal law restricts use of this device to use by or on the order of a
physician. Using the cable remote control option, the physician can oper-
ate the device from the sterile field.
To avoid potential serious injury to the user and patient and/or damage to
this device, the user must test this equipment prior to every medical pro-
cedure.
Only use the remote control dry.
1. Activate the device with the power switch.
2. Connect the cable remote control to the socket on the front of the de-
vice.
With certain models, the cable remote control can only be connected to
the device using an adapter.
In this case, plug first the adapter (offered by the distributor) to the socket
on the front of the device and then connect the cable remote control to the
adapter.
3. You can activate all functions of the device with the remote control:
(2)
(1)
(4)
Short hold of the SPECIAL key = Wash -> rapid change of flow and pressure
Long hold of the SPECIAL key = Turbo -> to improve visibility within the
joint
(3)
(1)
Increase and decrease the desired flow
(2)
Start/stop the pump
(3)
Quick change (function "SPECIAL")
(4) Increase and decrease the desired pressure
Federal Law (on-
ly for U.S. mar-
ket)
WARNING
WARNING
NOTE
Only for FloSteady
EN