Risk Of Explosion; Description Of The Product; Fire Hazard - Absaar AB-EJS260 Gebrauchsanweisung

Operating instructions
 RISK OF ELECTRIC SHOCKS !
• Do not expose the Jumpstarter to rain, water, vapour or
condensation.
• Do not insert any foreign bodies or objects in the connector
of the clamps or in the USB port.
• Always keep children at a distance.
• Do not open the Jumpstarter to change the internal batteries.
The batteries cannot be replaced.
 RISK OF EXPLOSION !
• Do not expose the device to direct sunlight!
• When using the EJS-260 do not smoke and keep any incan-
descent objects at a distance!
• Do not use the Jumpstarter in confined smoke-filled spaces
such as in the hold of a motorboat.
• Do not use the Jumpstarter near to propane tanks.
• The clamps of the Jumpstarter must be connected to the
correct polarities of the vehicle:
• Red Positive (+) clamp of the EJS-260 to the Red Positive
(+) terminal of the vehicle battery.
• Black Negative (-) clamp of the EJS-260 to the Black
Negative (-) Terminal of the vehicle battery.
• An Inversion of polarity can damage the Jumpstarter!
 COMMENT :
Store the Jumpstarter in a sheltered space away from extreme temperatures for best performance in conditions above 0
degree.
People (children in particular) who lack the knowledge or have insufficient experience with the device or have a physical,
sensory or mental handicap should only use the device under the supervision of someone responsible who will ensure
their safety. Children must be supervised and must not be allowed to play with this device.

3) DESCRIPTION OF THE PRODUCT

➓ ➒ ➐ ➏
➑ ➎ ➍
 FIRE HAZARD !
• Do not crush.
• Do not perforate.
• Do not make the clamps touch each other or create an
electrical connection between them with a piece of metal
or a conductor. This can damage the Jumpstarter or create
a hazard.
• Always disconnect the connector of the clamps immedi-
ately after use.
• Do not store the Jumpstarter with the clamps connected to
the device.
• The EJS-260 is only designed to be used for a very short
period of time. Each start-up attempt should not exceed 3
seconds. Using the Jumpstarter for more than 3 seconds
can damage it. Wait for 1 minute between each start-up
attempt.
 CAUTION
Working temperature. Do not expose to working tempera-
tures in excess of +60°C (+140°F) or less than -20°C (-4°F).
Using the EJS-260 above or below these temperatures can
reduce the capacity of the Jumpstarter's internal battery or
shorten the service life of the battery.
➊
➌ ➋
8
➊ Torch (LED lighting)
➋ 12V DC Input
➌ LED charge status display
➍ USB port
➎ 12V DC port
➏ On/Off button
➐ USB port
➑ Jumpstart-Socket
➒ working light
➓ warning light
ABSAAR