Important Warnings; Battery Replacement - Telcoma PASSO FM400 Installationsanweisungen

GB

IMPORTANT WARNINGS

INSTALLATION
Do not install PASSOFM400 on metal surfaces!
Make sure the desired distance can be covered before fixing the keypad to
a surface.
CODES
After having keyed in the code, PASSOFM400 continues to transmit all the
time the # key is pressed.
After the code has been transmitted with the # key, the transmission can
be repeated by pressing the # key once again within 5 seconds.
PASSOFM400 ignores the number zero at the beginning of a code, for
example: the code 0438 is recognised as 438.

BATTERY REPLACEMENT

If the range decreases or the red LED flashes during the transmission,
¤
replace the battery with another having the same characteristics.
Make sure that the poles are positioned correctly (see fig. 1 detail 3).
BACKLIGHTING
Press the # key during the night to illuminate the keypad and then
introduce the code followed by #.
TELCOMA S.r.l. reserves the right to make modifications at any time they
deem necessary for the aesthetical and/or functional improvement.
37