AmazonBasics B077K3FJHC Kurzanleitung Seite 5

Securing The Case
• To secure the case to a fixed object using your provided security cable,
wrap cable around desired anchor point. Insert smaller looped end through
the larger loop end, then place smaller loop in the cable slots located at the
back, right of the case. Close door to secure.
Mounting Your Vault
• You can also secure the case to a solid surface with fasteners using the
mounting holes in the bottom of the case. Once a mounting location is
determined, open your vault and remove both bottom layers of foam liner to
expose mounting holes. Mark the hole locations, pre-drill holes, and secure
your case with appropriate fasteners. Replace foam upon completion.
NOTE: Fasteners are not included. Consult your hardware retailer for fastening
hardware for your particular mounting surface.
02-B077K3FJHC-AmazonBasics-Combination Lock-QSG-V02 (global).indb 5
Security Cable
5
3/15/18 11:58