Cerbos BTO 5 IN/UP Bedienungs- Und Installationsanweisung Seite 30

Disposal of packaging material and functionless product
A service fee for providing return and recovery of packaging material has been paid
for the packaging in which the water heater was delivered. Was paid pursuant to Act
No. 477/2001 Coll., as amended, at EKO-KOM a.s. The client number of the company
is F06020274. Take the product packages to a waste disposal place designated to
that purpose by the municipality. When the operation terminates, disassemble and
transport the discarded and unserviceable heater to a waste recycling centre
(collecting yard), or contact the manufacturer.
11. FUNCTIONAL DEFECTS
DEFECT
1 Water in the tank is cold
Water in the tank is not warm
2
enough
3 Water in the tank is cold
Water temperature in the tank
4 does not correspond with value
set
Do not try to repair the failure yourselves!
Seek either expert or service help. It does not take much for an expert to remove the defect. When making a
repair appointment, report the type and serial number you find on the performance plate of your water heater.
12. FIRE-FIGHTING REGULATIONS FOR INSTALLATION AND USE OF HEATER
We would like to emphasise that the heater must not be connected to power supply if work
involving flammable liquids (petrol, spot remover) or gases, etc., is performed nearby.
LED is on - heating element failure
LED is on - heating element failure
- operating thermostat failure
LED is not on
- power supply outside the heater
LED is on - thermostat failure
FAILURE
safety thermostat shut off
power supply
discontinued