Environmental Protection - Crown CT11020 Originalbetriebsanleitung

the milling direction� Do not apply extra effort - per-
forming the operation will take some time� Extra effort
will not expedite the working process, but will overload
the power tool�
• Turn the power tool off�
Parallel guide (see fig. 9)
Parallel guide 17 enables milling along the straight line
side surface of the workpiece�
• Set the space from the work piece brim by adjusting
the parallel guide 17, as described above�
• Perform the milling operation by pressing paral-
lel guide 17 to the side surface of the workpiece (see
fig. 9).
Power tool maintenance / preventive
measures
Before carrying out any works on the power tool it
must be disconnected from the mains.
Cleaning of the power tool
An indispensable condition for a safe long-term exploi-
tation of the power tool is to keep it clean� Regularly
flush the power tool with compressed air thought the
ventilation slots 8�
The manufacturer reserves the possibility to introduce changes.
After-sales service and application service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts� Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.crown-tools.com�
Transportation of the power tools
• Categorically not to drop any mechanical impact on
the packaging during transport�
• When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp-
ing packaging�

Environmental protection

Recycle raw materials instead of dispos-
ing as waste.
Power tool, accessories and packaging
should be sorted for environment - friendly
recycling�
The plastic components are labelled for categorized
recycling�
These instructions are printed on recycled paper man-
ufactured without chlorine�
English
20