GeoMax Zenith35 Pro Series Kurzanleitung Seite 18

Operation
☞
The battery is inserted at the side of the instrument.
1. To remove a battery, push the slide fastener of the battery com-
partment in the direction of the arrow with the open-lock symbol
and open the battery compartment.
2. Push the locker sideward and at the same time pull out the bat-
tery. This releases the battery from its fixed position.
3. Remove the battery.
4. To insert battery, push the slide fastener of the battery compart-
ment in the direction of the arrow with the open-lock symbol.
5. Open the battery compartment.
6. With the battery contacts facing upwards, slide the battery into
the battery compartment.
7. Push the battery backwards so that it locks into position.
8. Close the battery compartment and push the slide fastener in the
direction of the arrow with the close-lock symbol.
18
en