GRAVITY TLS 431 B Bedienungsanleitung

TLS 431 B
TOURING-LIGHTING STAND WITH SQUARE STEEL BASE
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
Gravity ® is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 | adamhall.com
FEATURES
• Ideal for rental and event organisers
• Rugged, heavy-duty base with three M20 female
threads for parallel use as a divider in Transflex cases
• Reinforcing sleeve for an stabalized base-to-pole connection
• 35 mm extension tube with M10 female thread
• Automatic LockPin
®
• Maximum height: 2.4 meters
Description
Well equipped to handle the daily grind and time constraints of touring:
That's the TLS 431 B light stand from the Gravity Touring Series. Its heavy steel
base featuring three M20 female threads for off-centre installation guaran-
tees a firm footing in all circumstances, whereas two integrated handles
make it easy to transport. In comparison to the standard series, the base is
slightly smaller, but it still offers the same amount of stability. The added bonus
here is that it can now also be used as a divider in Transflex cases. The base-
to-pole connection has been made stronger by adding a reinforcing sleeve
to prevent wobbling. With the 35 mm extension tube featuring a M10 female
thread, the stand can be extended in height up to 2.40 meters. Thanks to the
automatic LockPin technology, it has never been easier to adjust the height
®
of a stand. Because the pin automatically snaps into the holes when adjust-
ing upwards, a separate locking pin is no longer necessary.
SPECIFICATIONS
Product number
Product type
Type
Tubing material
Tubing color
Tubing surface
Min height
Max height
Transport length
Height adjustment
Base material
Material of height adjustment
Dimensions Base (W x H x D)
Base weight
Max. load capacity
Weight
GTLS431B
Stands and Tripods
Lighting Stands
Steel
Black
Powder coated
143 mm
242 mm
143 mm
Automatic LockPin
®
Steel
Steel
537 x 20 x 535 mm
12.35 kg
25
17 kg