Chicco neuvo Bedienungsanleitung Seite 12

• Ensure that during these opera-
tions the moveable parts of the
stroller do not come into contact
with your child.
• Make sure that the person using
the stroller knows how to use it
safely.
• The product must be assembled
by an adult.
• This product must only be pu-
shed by an adult.
• To avoid all risks of strangulation,
never give children objects with
cords or strings attached, or lea-
ve them within their reach.
• Do not use the stroller on stairs
or escalators: you could lose con-
trol of the stroller.
• Always pay attention when
going up and down steps or pa-
vements.
• If the stroller is left exposed to
direct sunlight for a long time,
allow it to cool down before pla-
cing your child inside. Prolonged
exposure to direct sunlight may
cause the fabric to fade.
• Prevent the stroller from coming
into contact with salt water. It
may cause rusting.
• Do not use the stroller on the be-
ach.
• When it is not being used, the
stroller should be kept out of
children's reach.
CLEANING AND MAINTENANCE TIPS
This product requires periodical maintenance. Cleaning and
maintenance operations must be carried out by an adult.
CLEANING
The cover cannot be removed. Clean all fabric parts with a damp
sponge and neutral detergent. Please refer to the care labels for
instructions on how to clean the fabric parts. Periodically wipe
clean plastic parts with a soft damp cloth. Always dry the metal
parts to prevent rusting if the stroller has come into contact with
water.
Wash by hand in cold water.
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
MAINTENANCE
Lubricate the moving parts only if necessary, with a light applica-
tion of a silicone based lubricant. Regularly check the condition
of the wheels and, keep them clean of dust and sand. To avoid
friction that may prevent correct operation of the stroller, make
sure that all the movable plastic parts along the metal frame are
clean of dust, dirt or sand. Keep the stroller in a dry place.
COMPONENTS
Check that none of the components of this model are missing
before assembling the product. If any part is missing, contact
the Chicco Customer Service. No tools are needed for product
assembly. The following pieces are needed for product assembly:
• 1 stroller
• 2 front wheels
• Rear wheel group
• 2 handles
• 1 sun hood
• 2 shoulder straps
• 1 cup holder
• 1 tray
• 1 storage basket
• 1 rain cover
WARNING: The accessories described above may not be available
for some versions of this product.
GENERAL INSTRUCTIONS
ASSEMBLING THE HANDLES
1. Push the handles inside the frame's tubular structure as
shown in Fig. 1 until you hear a click. Make sure not to fit the
handles in the opposite direction (Fig. 1B). Check that they
have been fit in correctly by pulling the handles up.
WHEELS ASSEMBLY
2. Mount the front wheels on the stroller until they are locked
in position (Fig. 2). You can remove the front wheels using the
tabs shown in Fig. 2A.
3. Fit the rear wheel group as shown in Fig. 3 and make sure it
is locked in position. To remove the rear wheel group, press
the pin (Fig. 3A) and put out the wheel set from the tubular
frame.
Before use, make sure that the wheels are fastened correctly by
pulling firmly on them.
OPENING THE STROLLER
WARNING: To avoid injury, make sure that your child is kept away
when folding and unfolding this product.
4. Hold the stroller by its handles in vertical position with the
wheels facing forward (Fig. 4). Release the closing device
(Fig. 4A) and push the front part of the stroller forward (Fig.
4A-4B). Push the rear primary locking mechanism down with
your foot (Fig. 4C).
WARNING: before use, make sure that the stroller is locked in
open position by checking that the rear locking device is actually
loc
US
Th
de
bu
WA
de
be
5.
WA
yo
HO
Th
6.
WA
diffi
AD
7.
RE
Th
tan
8.
9.
SW
Th
10
Th
ver
gro
etc
WA
sam
STO
Th
11
BU
12
13
14