Ayce JLVWB6L Gebrauchsanweisung Seite 60

d. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from intended could
result in a hazardous situation.
5.5 Service
a) Have your power tool serviced by qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6 GENERAL SAFETY INSTRUCTIONS FOR THE COMPRESSOR
Attention! To protect against electric shock, injury and fire, the following
basic safety precautions must be followed when using this compressor.
Read and follow these instructions before using the tool.
1. Keep your work area in good order
Disorder in the work area can lead to accidents.
2. Consider work area environment
Do not expose the compressor to rain.
Do not use the compressor in damp or wet environment.
Keep the work area well lit.
Do not use the compressor where there is risk of fire or explosion.
3. Protect yourself against electric shock
Avoid body contact with earthed parts (e.g. pipes, radiators, electric cookers,
refrigerators).
4. Keep other persons away
Do not let other persons, especially children; touch the compressor or the cable.
Keep them away from your work area.
5. Store your unused compressor in a safe place
The unused compressor should be stored in a dry, high or locked place, out of
reach of children.
6. Do not overload your compressor
You will do the job better and safer at the rate for which it was intended.
7. Use the right compressor
Do not use low-power machines for heavy-duty work.
JLVWB6L (1330985)
EN
04
|