Acson E SERIE Installationsanleitung Seite 9

UNDER CEILING INSTALLATION
Install the Suspension Bolts
1. Install the suspension bolts so that it can support the indoor unit.
2. Adjust distance to ceiling before installation.
3. Refer to the dimension given to install the unit.
Install the Indoor Units
1. Insert the suspension bolts into the fi ttings of the hanger bracket.
2. Set the nuts and washer on the both side of the metal fi ttings.
3. Secure it with nuts.
4. Attach the hanger cover (4 pcs) to the units.
Installation Ceiling Type
Suspension Bolt
Hanger Cover
Suspension Bolt
Hanger Cover
Hanger Rod
Installation Floor Standing Type
479mm 547mm or more Mounting Bracket
78mm
123mm
307mm
Floor
Rear Piping Hole
1-7