Front Panel Description - Chauvet Professional RDMX Splitter 8 Kurzanleitung

Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram

Front Panel Description

POWER
SIGNAL
Panel Item
<POWER> Indicator
Input <A>
Input <B>
Mode Button
Signal Ouput <1> Thru <8>
To use the RDMX Splitter 8 as a switch between 2 different input sources, plug the DMX Input lines
into Signal Output Ports 5 thru 8. Use the Mode Button to switch between sources.
RDMX Splitter 8 QRG Rev. 1
QUICK REFERENCE GUIDE
Safety Notes. Use at least one mounting point per product. Make sure the
Safety Cable
Mounting Clamp
1X8 MODE
2X4 MODE
A B 1
Mode Button
Illuminates when power has been applied to the product
DMX Input port A. Indicator light will illuminate when input signal is being received
DMX Input port B. Indicator light will illuminate when input signal is being received
Selects 1x8 Mode or 2x4 Mode.
• 1x8 Mode sends the DMX signal received from Input Port A to all 8 Signal
Output Ports.
• 2x4 Mode sends the DMX signal received from Input Port A into Signal
Output Ports 1 thru 4 and from Port B into Signal Output Ports 5 thru 8.
DMX Output ports 1 thru 8. Indicator lights on each port will illuminate when a
signal is being output through the port.
2 3 4 5
Function
6 7 8
EN
2