Quiksilver FRAGMENT Anweisungen Handbuch Seite 16

1. This is the default state of ALARM.
2. While in default mode, the following sequence will update Alarm
and Chime Icons.
-> Press [S4], enables the Alarm, press [S4] disarmed alarm and th en enable
Chime, and finally press [S4] again will arm both A larm and Chine. Another
press of [S4] will disable Alarm and Chime this time.
3. During Alarm default state, pressing [S3] will enter into setting
state where the hour field is blinking and the Alarm Icon is automatically armed.
NOTES