Troubleshooting - National Instruments Ni-Daqmx Installationsanleitung

Accessories
Install accessories and/or terminal blocks according to the instructions in
their installation guides. For SCXI and SCC signal conditioning systems,
continue with the instructions in the DAQ Getting Started Guide.

Troubleshooting

If you have problems installing your software, go to
. For hardware troubleshooting, go to
daqmx
your device name, or go to
If you need to return your National Instruments hardware for repair or device
calibration, go to
Merchandise Authorization (RMA) process.
Go to
ni.com/info
NI-DAQmx documents and their locations.
Next Step
To confirm your device is working properly and start your application, refer
to the DAQ Getting Started Guide. After you install NI-DAQmx, the
NI-DAQmx software documents are accessible from Start»All Programs»
National Instruments»NI-DAQ»NI-DAQmx document title. Additional
resources are online at
The following table lists device terminal/pinout locations.
Location
MAX
DAQ Assistant
NI-DAQmx Help
ni.com/manuals
LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of
National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments
trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the
patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents .
© 2003–2010 National Instruments Corp. All rights reserved.
323235U
ni.com/kb
and enter
ni.com/info
and enter
rddq8x
ni.com/gettingstarted
Right-click the device name under Devices and
Interfaces, and select Device Pinouts.
Right-click the device name under Devices and Interfaces,
and select Help»Online Device Documentation. A
browser window opens to
results of a search for relevant device documents.
Select the task or virtual channel, and click the
Connection Diagram tab. Select each virtual channel
in the task.
Select Start»All Programs»National Instruments»
NI-DAQ»NI-DAQmx Help.
Refer to the device documentation.
Jul10
ni.com/support/
ni.com/support
.
to start the Return
rdsenn
for a complete listing of the
.
How to Access Pinout
ni.com/manuals
and enter
with the