Changing The Rechargeable Battery - Wella Professionals xpert Bedienungsanleitung

Xpert.book Seite 35 Mittwoch, 14. November 2012 11:20 11
Replacing the blade head
1. The appliance must be switched off.
2. First insert the base of the blade head in
the appliance (see illustration), then
swivel it upwards and press into place.
Do not use force. You must hear the
blade head click firmly into place.
Cleaning the appliance
– Clean your appliance occasionally with a damp cloth, then wipe
it dry.
Cleaning the charging contacts
If the charging contacts 2 on the appliance or the charging con-
tacts 7 on the charging unit are dirty, charging may not be possible
or may be interrupted.
– Clean the contacts using a cloth or wad of cotton wool soaked in
alcohol or spirit.

5 Changing the rechargeable battery

If the capacity of the rechargeable battery starts to fall off, you can
order a new one from Wella Customer Service and insert it instead
of the old one.
Use only the original Wella rechargeable battery which you can or-
der from Wella Customer Service.
When disposing of the old battery, be sure to observe the disposal
regulations (See "Disposal" on page 38).
CAUTION:
The power cord 11 must never be plugged into the appliance when
you are changing the rechargeable battery.
1. Unscrew the screw next to the socket 1
on the bottom of the clipper.
Screw
2. Slide the cover off the appliance.
ENGLISH 35