Troubleshooting - ION PARTY ROCKER PLUS Schnellstartanleitung

Rear Panel
1. Power On/Off
Rocker Plus on or off.
2. Power Cable Input (IEC): Insert the
included power cable here to power the
unit.
3. Dome: The dome light can spin and react
to the music playing (depending on the
Light Mode that is selected).
Warning: Do not look directly into the dome light. Do not sit, stand, or apply pressure on
the dome light.
Connecting with a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Party Rocker Plus and it will automatically go into pairing mode to search for
Bluetooth devices. You will know you are in pairing mode when the Bluetooth LED is off.
3. If your Bluetooth device is not able to pair to Party Rocker Plus, press the Bluetooth
Disconnect button on the unit to break previous Bluetooth connections and reset the
Bluetooth module.
4. Navigate to your Bluetooth device's setup screen, find Party Rocker Plus and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
5. Bluetooth LED will light up solid when it is "paired."
Note: If you experience trouble pairing or playing music, update your device's OS.
6. To disconnect pairing, press the Bluetooth Disconnect button on Party Rocker Plus.
7. To connect to another Bluetooth device, repeat steps 3-4.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source or musical
instrument. Also, try to reduce the overall volume of Party Rocker Plus.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower
the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably
feedback. Point the microphone away from the speaker.
If you can't hear the microphone over the music volume: Turn down the music volume
from your source.
6
Switch: Turns Party
3
1 2