Advanced Settings; Advanced Setup - eTIGER S3b Sim Secual Kurzanleitung

Advanced settings

For the installation of your accessories, please check the
full manual of www.etiger.com.
Connect more accessories
On the control panel, type your access code (default code: 1234) followed
by the key : your control panel is now in Connection mode.
Within the next 15 seconds, trigger the accessory you wish to
connect (for a RFID tag, swipe it in front of the RFID reader of the
control panel). You hear one beep: the accessory is registered.
A piece of advice
Save time and register your accessories using the Connection
Assistant in the "Support" section of our website (www.etiger.com).
Change the access code
Do not forget to change your access code. To change your access
code, send "13" by SMS to the control panel.

Advanced setup

For more settings, please refer to the user
manual of the control panel, available for
download on www.etiger.com
10