SKYTRONIC MD-502 Bedienungs- Und Montageanleitung Seite 12

The camera can be mounted on a fixed mounting
bracket or a removable clamp bracket. Both parts
contain an adjustable rotating head which allows
an accurate orientation of the camera (see
figure).
Note! Do not forget to remove the protection foil
from the lens. Otherwise you will get an unsharp
picture.
Connect the supplied video cable to the monitor
and the CCD camera. Plug the mains adapter into
the power socket at the rear of the monitor (see
fig.). Plug the ac/dc adapter in a wall outlet. Press
the 'POWER' button on the front side of the
monitor to switch the unit on. The power LED (2)
will light. Push the appropriate camera selection
button (C1 or C2). Set the brightness and
contrast with the rotating buttons 'BRIT' and
'CONT' at the rear side of the monitor.
If two cameras are connected, you can select the
channel manually by pressing the selection
buttons C1 or C2. Press the 'AUTO' button for
automatic camera selection. Set the channel
switching time between 1 and 30 seconds via the
'TIME' button on the front side of the monitor.
__________________________________________