Electrical And Wiring; Electrical Data; Recommended Fuse And Cable Sizes - Acson R410A-Serie Installationsanleitung

Vorschau ausblenden

Inhaltsverzeichnis

Verfügbare Sprachen

•

Do not allow water remain in the water pipes if the unit is not operating for a long period.

Water must be drained out if the unit is not running during winter. Failing to do so would cause the pipe to crack.

•

Do not drink the chilled water in the unit.

•

Refer to the wiring diagram provided on the unit when making electrical wiring.

•

Do not ground any electrical equipment to the water piping.

Table B-1 : R410A - Heat Pump

Model

Power supply

Voltage range

Nominal Power Input (Cooling/Heating)

Nominal Current Input (Cooling/Heating)

Compressor Maximum Continous Current

Compressor Full Load Current (FLA)

Compressor Locked Rotor Current (LRA)

Pump Power Input (Cooling/Heating)

* Readings taken at rated compressor frequency. The Power Input and Current differ depending on the combination of

outdoor temperature and entering water temperature. For further details, please refer to Technical Manual.

Heat Pump

Model

Voltage Range **

Recommended Fuse *

Power Supply Cable Size *

Number of Conductor

Interconnection Cable Size *

IMPORTANT : * The figures shown in the table are for information purpose only. They should be checked and selected to

comply with the local/national codes of regulations. This is also subject to the type of installation and

conductors used.

** The appropriate voltage range should be checked with label data on the unit.

PRESSURE GAUGE

GATE

VALVE

GATE

BALANCING

THERMOMETER

VALVE

FLEXIBLE

GATE

THERMOMETER

VALVE

FLEXIBLE

! ! ! ! ! CAUTION