Seite 1
2030-0 11/19 - Montageanleitung - Assembly instructions - Notice de montage - Montagehandleiding - Návod na montáž - Instructiune de montaj D133270 - Navodila za namestitev D133275 - Installationstruktioner D130370 D130375 Klebetechnik / bonding technique / fixation à coller / verlijm techniek Seite / Page / page / Pagina 2 - 11 Schraubtechnik / Profile drilling method / fixation à...
Seite 2
2030-0 Pos. Bezeichnung Ersatzteil-Nr. Preis 1x Wandanschlussprofil E60230 79,95 € 1x Wannenaufsatz 2 teilig 1x Wannenaufsatz 3 teilig 1x Dichtprofil horizontal E60076 18,95 € 6x Kappenschraube 3,5 x 9,5 mm 1x Endkappe für Dichtprofil 6x Abdeckkappe für Kappenschraube 1x Klebeset komplett...
Seite 3
Ø 3 mm Klebetechnik / bonding technique / fixation à coller / verlijm techniek - Beipackzettel unbedingt beachten. - Note: Read enclosed instruction leaflet carefully - Veuillez impérativement faire attention à la notice explicative. - Let op: les de bijsluiter...
Seite 4
* Nicht im Lieferumfang enthalten, not included in delivery, non fourni dans l'emballage, niet bij levering inbegrepen, *Klebestreifen, adhesive stripes, - Fläche reinigen ruban adhésif, - Clean the surface plakbanden - Nettoyer la surface - Oppervlak reinigen Pos. 9.1 - Kleber nach Anleitung anrühren und auf die gekennzeichneten Flächen des Wandanschlußprofiles auftragen.
Seite 5
5 Std. - Nach ca. 5 Stunden kann die Montage der Badewannenfaltwand begonnen werden. - After approx. 5 hours the bath screen can be installed. - Après env. 5 heures le montage du pare-baignoire peut démarrer. - Überstehenden Kleber entfernen. - Remove overlaying glue.
Seite 6
Pos. 3 Pos. 7 Pos. 2# # optional, en option, optioneel Pos. 3...
Seite 8
Ø 3 mm Pos. 6 Pos. 8 Ø 3 mm Pos. 6 Pos. 8...
Seite 9
- Beipackzettel unbedingt beachten. - Note: Read enclosed instruction Pos. 12 leaflet carefully - Veuillez impérativement faire attention à la notice explicative. - Let op: les de bijsluiter Pos. 9.4 - Oberfläche reinigen Montagehilfe fixieren - Clean the surface Fix mounting aid - Nettoyer la surface aide au montage fixer - Oppervlak reinigen...
Seite 10
*Anrührunterlage stirring support - Kleber nach Anleitung anrühren support pour mélanger und auf die gekennzeichnete Fläche aanroer-ondergrond des Stabilisationsbügels auftragen. - Mix glue according to the instuctions and Pos. 9.2 apply the mixture on the marked areas. - Appliquez la colle mélangée selon les instructions sur la surface de la barre de stabilisation.