Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2831600_RW 11_BA:RW 11 26.07.10 10:08 Seite 9
RW11 0705
Accessories
R 103 Support stand
R 182 Cross-sleeve
Associated standards and regulations
ssociated EU guidelines
EMC guidelines: 89/336/EC
Machine guidelines: 73/023/EWG
Construction in accordance with the following
safety standards
EN 61 010-1 UL 3101-1
Construction in accordance with the following EMC
Standards
EN 50 082-1
EN 55 014 EN
Permitted stirrer tools
R 1001 Blade stirrer
R 1002 Helix stirrer
R 1003 Helix stirrer
Technical data
Design voltage:
VAC 100....240±
Design frequency:
Hz
50/60
Drive unit:
Speed-controlled, two-pulse
EU external rotor motor with
magnetic auxiliary torque
Power consumption:
W
8
Power output:
W
1
Max. torque:
( Agitator shaft ) Ncm 0.8
Speed range:
Rotational speed setting:
Speed variation on
Max. stirrind
for very low
Perm. ambient
Perm. relative humidity: %
Perm. ON duration:
CAN/CSA C22.2 (1010-1)
Protection to DIN 60 50:
Exess voltage category:
Contamination level:
60 555-2; -3
Protection class:
Protection at overloaded
ter
Operation position:
Extension arm:
Support stand diameter: mm 10
Clamping chuck
Housing material:
Dimensions:
10%
Weight:
RPM 0 bis 2000
Knob, front
load change:
%
±10
quantity (Water) ltr
2
viscosity (VLV):
mPa·s<100
temperature:
°C
+5 bis +40
80
%
100
IP 42
II
2
II
Motor current limi-
on stand, clamping chuck
pointing down
Integrated in the plastic
housing
clamping range: mm Plug-in coupling for Ø 4 shaft
Glass / Thermoplastic
mm 86 x 89 x 175
kg
0,39
( without scale )
9
Werbung
Inhaltsverzeichnis
