Bluetooth Operation; Troubleshooting - Party Light & Sound PARTY-BOX410 Bedienungsanleitung

IN). Long press to switch the LEDs on the woofer on or off
11. POWER SWITCH (POWER ON/OFF)
12. Main Volume control
13. PLAY (PLAY/PAUSE MUSIC): When in USB/TF mode, press this button to pause or play.
14. PREV (PREVIOUS SONG): When on USB/TF/Bluetooth mode, press this button to move to the previous track.
Hold it down to reduce the volume for USB/TF/Bluetooth.
15. NEXT (NEXT SONG): When on USB/TF/Bluetooth mode, press this button to move to the next track. Hold it
down to increase the volume for USB/TF/Bluetooth.
16. MIC priority switch: reduces the sound of the music when the microphone is used
17. AUX INPUT: The Input is designed to connect directly to a music player.
Built-in recording function of microphone sound
⠗ In USB/TF play mode: Long press on the record key to go into recording mode. The current sound output will
stop and go to mute status. The recording will start when the screen displays 00:01. You can use a microphone
to record. If you connect the USB/TF card for the first time to the speaker, the system will create a folder.
USB/TF Operation
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could generate
interference. If the speaker stops working, switch it off and on again, or unplug USB/TF card and re-plug it. The
speaker should be back to normal status.
Supported music formats: MP3, WMA
1. USB port: plug and play
2. TF slot: plug and play
3. Mode key: press to cycle through external AUX sound source/USB/TF/BLUETOOTH. Keep pressed to switch the
LED illumination of the woofer on or off.
4. Play/pause: Press to play, press to pause, press again to resume play.
5. Previous/Next: During play press once to go back to the beginning of the track or to the next track.
6. Repeat: During play press once to repeat the current song, press twice to repeat all songs.

BLUETOOTH OPERATION

1. Turn on the unit and press the MODE button on unit or on the remote control to select the Bluetooth function.
"blue" will start flashing on the display, the system automatically enters search mode.
3. Activate the Bluetooth feature on the external device to be paired.
4. Initiate a search for devices. The device shows up as « PARTY-BOX«.
5. Select it and enter the password «0000» if required.
6. Press the PLAY button on the unit or the ▶
PREV, or the keys  and  for the selection of songs.
AUX IN MODE:
Press MODE button on the unit or the remote control until AUX is selected. Play the music of the device connec-
ted to the AUX input.
Trouble shooting
If a problem occurs, follow the steps in the table below. If problem still can't be solved, please contact your retai-
ler.
4
key on remote control, to start playing and the buttons NEXT and

EN