Victure PC530 Bedienungsanleitung Seite 14

Wireless connection
Pair the camera with WIFI (5G band network pairing is not supported
temporarily).
·
After confirming that the mobile phone has been provided with stable
EN
WIFI, select the wireless addition. Confirm that the camera has been
successfully started, and then click Next. If starting is not successful,
repeat the above-mentioned power-start steps; enter the password for
the WIFI that mobile phone currently connects (click on "
right side of the column Password to show or not show the password),
and click Next.
· Select the country where you are currently located. Adjust the volume
of mobile phone and approach the camera as far as possible, and click
Next.
· At this time, the mobile phone will emit sound wave for addition, and
click the Next Step after hearing "Tinkling" sound from the camera,
and the wait prompt is provided according to the time at the lower
part of APP.
· The camera broadcasts "Connected to the Internet" (green light flash-
es), indicating that the addition is successful. To name the device, you
can name it or skip the step, and if the step is skipped , APP will auto-
matically generate a name for a number.
· Make 360 ° panoramic shooting or skip this step, if 15 pictures had
been taken, you can then view the pictures on your phone.
10
" on the