Application; General Safety Information - Ecom CUBE 800 Handbuch

1. Application

The Cube 800 is an intrinsically safe water-, dust- and impact resistant Wearable
Camera & Thermal Imager for industrial application in areas with an increased
risk of explosion in zone 1, zone 2, zone 21 and zone 22. Approved for Division 1,
Class I, II, III.

2. General Safety Information

Use of the device assumes that the user observes the conventional safety
regulations and has read the certificate in order to eliminate faulty operation of
the device.
The following safety regulations are to be observed:
• Carefully read the User Manual before operating the Cube 800.
• Use only a Librestream supplied power adapter with the equipment. Use of
other adapters will void the warranty and may cause fire or explosion hazards.
• Operate the external power adapter in a well-ventilated area. Do not cover the
power adapter with papers or any other items as the adapter may become hot.
• If you determine that the device is hot, emits an odor, or changes color or
shape, disconnect power immediately. The device must not be used again.
• Do not charge the device inside the Ex-area.
• Do not open the device inside the Ex-area.
• It must be ensured that the maximum input voltage (Um) for the device from
the charger is 6V.
• The ambient temperature during charging shall be in the range from 0 °C to
45 °C.
• Only those accessories approved by Librestream Technologies Inc. may be used
with the device.
• The device must be protected against strong impacts. The wrist lanyard should
be used to provide extra security against drop and impact. The lanyard is not
intended to be used for electrical dissipation.
• The device must be protected against high electrostatic charge generating
processes.
• The capacitance of the device is ≤ 10pF.
4