Christopeit Sport TM800S Montage- Und Bedienungsanleitung Seite 15

Assembly Instructions
Before beginning assembly, be sure to observe our recom-
mendations and safety instructions.
Step 1:
Remove the treadmill
1. Remove all small parts, loose packing material out of the box
and then take out with help of a second person the preassem-
bled frame of packaging. Put your hands below the main frame
(1) to take out of carton and take care of no squeezing. Don't
cut the nylon strap for removing the main frame from carton.
Step 2:
Unfolding the support tubes (2)
1. Cut the nylon strap with care and unlock the left and right
supports (2L+2R) by turning the handle knob left and right
(24L+24R) in un-lock position.
2. Fold up the supports left and right side (2L+2R) with care and
lock up the upright position of supports (2L+2R) by turning the
handle knob left and right (24L+24R) into lock position.
Step 3:
Positioning the handles (4)
1. Rotate the handles (4L + 4R) down.
2. Rotate the computer (3) until the positioning pin (9) pops up.
15