Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical characteristics
Measures:
Stroke:
Drilling heights
with machine arm (3582E000)
Weight:
Fixture of the motor:
Order no.
Available special accessories:
Machine arm drilling height 550 – 1460 mm
Drill stand Bohrwurm EBW 2300 with operating instructions in the carton.
Application for indented purpose
The Bohrwurm EBW 2300 is a mobile stand for core hole drilling. Differing from
freehand drilling, the Bohrwurm significantly reduces the risk of injuries (for
example to the wrist). It can be used with diamond core drills with mounting via
clamping neck Ø 60mm (e.g.: ETN 162/3) or smaller, with use of bushings, for
horizontal drilling.
In case of wrong handling or misuse, the producer does not assume any
liability.
Safety Instructions
Safe use of the tool is only possible if the user had
studied the instruction manual and safety instructions
completely and is strictly following the instructions
contained therein. Additionally, the general safety
instructions of the leaflet supplied with the tool must be
observed. Prior to the first use, the user should absolve a
practical training.
Perform a visual inspection before each use of the Bohrwurm. At this time,
pay attention to the following: Cracks, leakage, damaged, loose, or missing
parts.
In case of any damage, the Bohrwurm no longer may be used and must be
repaired by a qualified repair service.
Item
Supply
900x900x1620 mm
750 mm
1460 – 2300 mm
550 – 1460 mm
Neck clamping Ø 60mm
09654000
Order no.
3582E000
10
40 kg
Werbung
