Display Program Settings - SWAGTRON SWAGGER Benutzerhandbuch

2.5 DISPLAY PROGRAM SETTINGS

The display features 5 program settings which are not readily indicated on the screen by default. To access
settings, press and hold the UP ARROW and DOWN ARROW button simultaneously then press the POWER
button to cycle between settings. For each setting, use the UP ARROW and DOWN ARROW button to adjust
options or levels according to which setting you are modifying. To exit settings, simply press and hold the
UP ARROW and DOWN ARROW button simultaneously or refrain from pressing any button and the display
will time out and return to the main interface on its own. See the following information for detains related to
each setting.
P 01: Backlight Brightness Setting
This setting is for display's backlight brightness. Brightness may be set to 3 different intensities.
P 02: Measurement Setting
This setting determines the unit of measurement in which your current speed is displayed. Speed may be
displayed in either miles per hour (MPH or Mp/h) or kilometers per hour (KPH or Kp/h). By default, this setting
is at 0, with the measurement being kilometers per hour (KPH or Kp/h). If changed, the display will show the
related icon.
P 03: Automatic Shutoff Time Setting
This setting is for the automatic shutoff time. Time may be set to any 5 minute increment between 0 and 60
(i.e. 5 for 5 minutes, 10 for 10 minutes). By default, the timer is set to 10 minutes. Selecting 0 will turn this
feature off.
12
ENGLISH