Troubleshooting - EINHELL EF 1800 Originalbetriebsanleitung

12. Troubleshooting

If the equipment is operated properly you should experience no problems with malfunctions or faults.
In the event of any malfunctions or faults, please check the following before you contact your customer
services.
Problem
The equipment
does not heat
Remote control
does not work
Anl_EF_1800_SPK9.indb 27 Anl_EF_1800_SPK9.indb 27
GB
Possible cause
The power plug is not connected
The main switch is not turned on
Equipment in standby
Heat output switched off
The thermostat is set too low
"Timer" has switched off the
equipment
Battery discharged
Remote control beyond range
Direct sunlight on the heater
- 27 -
Remedy
Connect the power plug
Turn on the main switch
Press the "Power" button
Adjust the heat output
Increase the temperature
Change the selected time
Replace the battery
Reduce the distance to the heater
Reduce the sunlight (provide shading)
22.11.2018 06:58:50 22.11.2018 06:58:50