Signal Inputs - Kindermann TD-1055-S Bedienungsanleitung

3.5 Signal inputs

3.5.1 USB
Please note:
1. The output current of the USB 2.0 port is 500 mA. To ensure reliable operation,
do not use all USB ports at the same time to charge external devices.
2. The side USB ports are used to connect external devices to the Android system.
6
The front USB ports are available to the active source. The assignment is automatic
with the source switching.
3. To upgrade the software, please use a USB 2.0 USB stick formatted with the FAT32 fi le system.
3.5.2 HDMI-IN
Please note:
The maximum supported resolution is 4K@60Hz. Detailed information
on the supported signal formats and resolutions can be found in the „Technical Data" section 9.3, page 42.
The maximum transmission rate depends on the quality and length of the HDMI cable.
We recommend the use of high quality cables.
3.5.3 TOUCH connection
Control cable for USB touch
Please note:
The maximum cable length supported by USB is 5 m. If you want to extend to a longer distance,
you must use high quality active cables with integrated signal repeaters.
3.5.4 VGA & analog Audio
Please note:
VGA and audio input work synchronously. Detailed information on the supported signal formats and resolutions
can be found in the „Technical Data" section 9.2, page 42.
USB stick
HDMI cable
RD
WT
YL
RD
BU
GN
RD
VGA cable
WT
YL
RD
Audio cable
BU
GN
RD
WT
YL
RD
RD
BU
WT
GN
YL
PC / DVD / Notebook
HDMI output
PC / Mac
RD
WT
YL
RD
BU
GN
RD
WT
YL
RD
BU
GN
RD
WT
YL
RD
RD
BU
WT
GN
YL
29