Quick Start Guide - nedis KAWP110FBK Kurzanleitung

a

Quick start guide

Double waffle
plate
For more information see
the extended manual online:
ned.is/kawp110fbk
Intended use
This product is specifically intended for making
waffles.
The product is intended for indoor use only.
This product is intended to be used in household
and similar applications such as kitchen areas.
Any modification of the product may have
consequences for safety, warranty and proper
functioning.
Specifications
Product
Article number
Dimensions (W x
H X D)
Input voltage
Rated power
Main parts (image A)
1
Top waffle grid
2
Bottom waffle grid
3
Thermostat slider
4
Power cable
5
Heat indicator LED
6
Power indicator LED
7
Handle
Safety instructions
WARNING
-
•
Ensure you have fully read and understood the
instructions in this document before you install
or use the product. Keep this document for
future reference.
• Only use the product as described in this
document.
KAWP110FBK
Double waffle plate
KAWP110FBK
310 x 75 x 230 mm
220 - 240 VAC ; 50 /
60 Hz
1200 W
•
Do not use the product if a part is damaged or
defective. Replace a damaged or defective
product immediately.
•
Do not drop the product and avoid bumping.
• Keep the product out of reach from children.
• This product may only be serviced by a qualified
technician for maintenance to reduce the risk of
electric shock.
•
Disconnect the product from the power source
and other equipment if problems occur.
• Do not expose the product to water or moisture.
•
The temperature of accessible surfaces may be
high when the product is operating.
•
Do not touch the hot parts of the product
directly.
• Be careful when opening the lid, hot steam may
escape.
•
Keep distance from flammable objects.
•
Do not let the power cable touch hot surfaces.
•
Do not leave the product unattended when
switched on.
• Always close the product before connecting it to
the power outlet.
•
Connect to a grounded outlet only.
•
Unplug the product when not in use and before
cleaning.
• Do not use external timers or remote control
systems to switch the product on or off.
Making waffles
1. Place the product on a flat, level surface.
2. Plug the power cable A
4
The waffle grids A
4
The power indicator LED A
indicate that the product is switched on.
4
The heat indicator LED A
indicate that the product is preheating.
3. Use the thermostat slider A
desired heat.
5
4
A switches off when the product is ready
for use.
4. Lift the top with the handle A
5. Pour the waffle batter into the centre of A
1
close A .
5
4 A lights up.
5
4
A switches off when the food is ready.
Be careful when opening the lid, hot steam may
-
escape.
4
4
into the power outlet.
12
start heating up.
6
lights up red to
5
lights up green to
3
to select the
7
.
2
and