Herunterladen Diese Seite drucken

yuki model DHC-2 BEAVER Anleitung Seite 17

Werbung

Überprüfen Sie den
Schwerpunkt
Der Schwerpunkt befindet sich bei
60mm ± 6mm hinter dem führenden Ende.
Check the C.G.
(Center of Gravity)
Install the motor battery, but do not connect it to
the ESC. Also install the battery hatch. All the
rest of the parts of landing gear version model
should already be installed.
The standart C.G. of this plane is positioned at
the 60mm behind the leading edge; And the mo-
vement of the C.G. should not exceed ± 6mm.
Otherwise it will have an effect on flying perfor-
mance nad cause crash.
If the C.G of the plane in not positioned at the
60 ± 6mm behind the leading edge, you should
adjust the C.G. by adding the balance weight
on nose or tail of fuselage. If the C.G. is too far
aft (tail heavy) you can add the nose balance
weight under cowl. If the C.G. is too far forward
(nose heavy you can add the tail weight in the
tail.

Werbung

loading

Verwandte Produkte für yuki model DHC-2 BEAVER