Ngrab - Streaming Setup - DREAM MULTIMEDIA Dreambox DM 600 PVR C Bedienungsanleitung

U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR

38.2 NGrab - Streaming Setup

Please read the section Expert setup to learn how to get into this menu.
In this menu you can set the IP address and port number of the NGrab server. The server
can be running on any workstation or server in the LAN or WAN.
Navigate to the option "NGrab-Streaming" and press
the OK-Button.
Srv IP:
Enter the IP address of the server or workstation
running the NGrab software.
Srv Port:
Enter the port number of the server or workstation
running the NGrab software.
Srv MAC:
The MAC address of the NGrab server will show once
you have it running and press the blue Options-
Button.
The MAC address is needed for the WOL (Wake On
LAN) function of the server. The server needs to fully
support APM (Advanced Power Management) and
WOL to use this function.
Press the green Options-Button to save your
settings.
You will be taken to the "Expert setup" menu.
- 90 -
english